Ugboro abụọ Venturi gbawara Nozzles 

Nozzles na-agbawa agbawa n'ozuzu na-abịa n'ụdị isi abụọ: bọre kwụ ọtọ na venturi, nwere ọtụtụ ọdịiche nke nozzles venturi.

A na-ekekarị nozzles Venturi ka ọ bụrụ otu ntinye venturi na ụzọ mbata abụọ.

Otu venturi nozzle bụ ihe a na-ahụkarị venturi nozzle. A haziri ya na ntinye ọnụ ụzọ ogologo ogologo, nke nwere akụkụ dị mkpụmkpụ dị larịị kwụ ọtọ, na-esote njedebe ogologo mgbawa nke na-agbasawanye ka ị na-erute njedebe ọpụpụ nke nozzle. Emebere udi a iji mepụta mmetụta nke na-eme ka ikuku na ikuku na-eru ngwa ngwa ma na-ekesa abrasive n'ụzọ zuru oke n'ụkpụrụ mgbawa niile, na-enye ihe dị ka 40% ọnụego mmepụta ka ukwuu karịa nozulu kwụ ọtọ.

Enwere ike icheta nozzle venturi abụọ dị ka nozzles abụọ n'usoro nwere oghere na oghere dị n'etiti iji kwe ka ntinye ikuku ikuku n'ime akụkụ mgbada nke nozzle. Nkwụsị ọpụpụ dịkwa obosara karịa oghere mgbawa ọkọlọtọ. Ugboro abụọ venturi nozzles na-enye ihe dị ka 35% nnukwu mgbawa kariri nozzle venturi gbawara agbawa na-enwe naanị obere mfu na ọsọ abrasive. Site n'inye usoro mgbawa buru ibu, nozzle abrasive na-enyere aka ịbawanye arụmọrụ mgbawa abrasive. Ọ dị mma maka ọrụ ebe achọrọ usoro mgbawa sara mbara.

Na BSTEC, ị nwere ike ịhụ ọtụtụ ụdị nozzles abụọ venturi.

1.     Site na ihe eji eme ihe nke Nozzle Liner

• Silicon Carbide Ugboro abụọ Venturi Nozzle:ndụ ọrụ na ịdịte aka yiri tungsten carbide, mana naanị ihe dị ka otu ụzọ n'ụzọ atọ nke ịdị arọ nke tungsten carbide nozzles. Silicon carbide nozzles bụ nhọrọ magburu onwe ya mgbe ndị na-arụ ọrụ na-arụ ọrụ ogologo oge ma na-ahọrọ nozzles dị arọ.

• Boron Carbide Ugboro abụọ Venturi Nozzle:ihe na-adịte aka a na-eji maka mgbawa nozzles. Ọ na-akarị tungsten carbide ugboro ise ruo iri yana silicon carbide ugboro abụọ ruo atọ mgbe a na-eji abrasives ike. Boron carbide nozzle dị mma maka abrasives ike ike dị ka aluminom oxide na nchịkọta ịnweta ahọpụtara mgbe enwere ike izere njikwa ike.

2.    Nkewa site na Ụdị eriri

• Eriri (onye ọrụ nkwekọrịta) eriri:Eriri ọkọlọtọ ụlọ ọrụ na eriri 4½ kwa inch (TPI) (114mm), ụdị a na-ebelata ohere nke ịdekọ ihe ma dịkwa mfe ịwụnye.

• Ezi eriri(NPSM eriri): National Standard Free-Fitting Straight Mechanical Pipe Thread (NPSM) bụ eriri ogologo nke ụlọ ọrụ a na-ejikarị na North America.

3.    Nkewa site na Nozzle Jacket

• Aluminom Jacket:na-enye nchebe dị elu nke ukwuu megide mmebi mmetụta na obere arọ.

• Jaketị igwe:na-enye nchebe dị elu nke ukwuu megide mmebi mmetụta na ibu arọ.