Type A sandblast gun is designed for fast efficient sand blasting, and liquid or air cleaning of parts and surfaces. It is a powerful tool for removing tar, rust, old paint, and many other substances, applicable to box manual sandblasting machines and box type automatic sandblasting machines.

Features:

· The gun body is made of die-casting aluminum alloy or PU material, high wear-resistance in lightweight

· Two types of abrasive inlets methods: thread type and straight-in type; for straight-in type, the abrasive inlet diameter is 22mm; for thread type, the abrasive inlet opening is 13mm; air jet openings are all 13mm

· A knurled nut at the gun outlet allows the operator to change nozzles without tools

· Adjustable bracket allows gun fixture in all possible blast directions

· Gun components such as air jet, nozzle insert, nozzle sleeve, and flange nut can be replaced separately to save costs

· Generally used with boron carbide blasting nozzle in the outer diameter of 20mm and length of 35mm

· Thicken aluminum alloy gun body and big air jet make the circulation space limited, which is more suitable for fine grain size blasting media

· Can be worked in both dry and wet blasting

· Suitable for glass, aluminum, and other also be used to clean structural parts, mechanical parts and products, and other items.

Operation:

1. The operator inserts the nozzle washer into a thread nozzle holder and screws in the nozzle, turning it by hand until it seats firmly against the washer.

2. With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting.

3. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.

4.The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

1. He kamupene hokohoko koe, he kaihanga ranei?

He wheketere matou, ko te nuinga o nga hua tungsten carbide, boron carbide, me nga hua carbide silicon. A ka hokohoko ano matou i runga i nga taputapu taapiri mo ia whakaritenga a nga kaihoko.

2. Me pehea e taea ai e matou te tohu te kounga?

I nga wa katoa he tauira i mua i te whakaputa i mua i te hanga papatipu; I nga wa katoa te tirotiro whakamutunga i mua i te tuku

3. He aha koe me hoko mai i a maatau, kaua mai i etahi atu kaiwhakarato?

He wheako nui mo te hua me te kaweake i te koungaISO, te utu pai me te tuku tere te whanui whakaputa whanui mo te kowhiringa; whakaora utu, whakaora pūngao, whakaora wa; whiwhi hua-kounga teitei, whai waahi pakihi, wikitoria te maakete!

4. Kia pehea te roa o to wa tuku?

Ko te tikanga, ko te 3 ~ 5 nga ra mena kei roto nga taonga; he 15-25 ranei nga ra ki te kore nga taonga i roto i nga taonga, i runga i te rahinga ota.

5. Kei te whakarato koe i nga tauira? He kore utu, he taapiri ranei?

Ko te tikanga, kaore matou e whakarato tauira kore utu. Engari ka taea e matou te tango i nga utu tauira mai i o ota nui.

6. He aha o tikanga utu me to tikanga?

Utu iti iho i te rite ranei ki te 1000USD, 100% i mua. Te utu nui atu i te rite ranei ki te 1000USD, 30% T / T i mua, toenga i mua i te tuku. Ka whakaaetia e matou te T / T, L / C, Alipay, PayPal, Western Union WeChat, me etahi atu.