Type A sandblast gun is designed for fast efficient sand blasting, and liquid or air cleaning of parts and surfaces. It is a powerful tool for removing tar, rust, old paint, and many other substances, applicable to box manual sandblasting machines and box type automatic sandblasting machines.

Features:

· The gun body is made of die-casting aluminum alloy or PU material, high wear-resistance in lightweight

· Two types of abrasive inlets methods: thread type and straight-in type; for straight-in type, the abrasive inlet diameter is 22mm; for thread type, the abrasive inlet opening is 13mm; air jet openings are all 13mm

· A knurled nut at the gun outlet allows the operator to change nozzles without tools

· Adjustable bracket allows gun fixture in all possible blast directions

· Gun components such as air jet, nozzle insert, nozzle sleeve, and flange nut can be replaced separately to save costs

· Generally used with boron carbide blasting nozzle in the outer diameter of 20mm and length of 35mm

· Thicken aluminum alloy gun body and big air jet make the circulation space limited, which is more suitable for fine grain size blasting media

· Can be worked in both dry and wet blasting

· Suitable for glass, aluminum, and other also be used to clean structural parts, mechanical parts and products, and other items.

Operation:

1. The operator inserts the nozzle washer into a thread nozzle holder and screws in the nozzle, turning it by hand until it seats firmly against the washer.

2. With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting.

3. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.

4.The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

1. Je, wewe ni kampuni ya biashara au mtengenezaji?

Sisi ni kiwanda, hasa bidhaa tungsten CARBIDE, boroni CARBIDE, na silicon bidhaa CARBIDE. Na pia tunafanya biashara kwa viambajengo vinavyohusiana kwa mahitaji ya wateja.

2. Tunawezaje kuhakikisha ubora?

Daima sampuli ya kabla ya uzalishaji kabla ya uzalishaji wa wingi; Ukaguzi wa mwisho kila wakati kabla ya usafirishaji

3. Kwa nini unapaswa kununua kutoka kwetu, si kutoka kwa wasambazaji wengine?

Uzoefu tajiri juu ya ubora wa bidhaa na usafirishaji wa ISO, bei nzuri na utoaji wa haraka wa wigo mpana wa uzalishaji kwa hiari; kuokoa gharama, kuokoa nishati, kuokoa muda; pata bidhaa za hali ya juu, pata fursa zaidi ya biashara, shinda soko!

4. Muda wako wa kujifungua ni wa muda gani?

Kwa ujumla, ni siku 3-5 ikiwa bidhaa ziko kwenye hisa; au ni siku 15-25 ikiwa bidhaa hazipo, kulingana na wingi wa agizo.

5. Je, unatoa sampuli? Je, ni bure au ya ziada?

Kwa ujumla, hatutoi sampuli zisizolipishwa. Lakini tunaweza kutoa gharama za sampuli kutoka kwa maagizo yako mengi.

6. Sheria na masharti yako ya malipo ni yapi?

Malipo Chini ya au sawa na 1000USD, 100% mapema. Malipo Ni Kubwa kuliko au sawa na 1000USD, 30% T/T mapema, salio kabla ya usafirishaji. Tunakubali T/T, L/C, Alipay, PayPal, Western Union WeChat, na kadhalika.