IiPros and Cons of Dry Blasting

Ukudubula okomileyo, okwakwaziwa njengokuqhushumba kweabrasive, grit blasting okanye spindle blasting, lunyango lwangaphambili. esusa umhlwa kunye nezinto ezingcolisa umphezulu ukusuka kwindawo yentsimbi ngaphambi kokugquma ngomgubo okanye ukongeza enye isambatho esikhuselayo.Isitshixo sokuqhushumba okomileyo kukuba ukugqitywa kuveliswa ngamandla empembelelo yeendaba, yonaiyafana ne-Wet Blasting kodwa ayisebenzisi manzi okanye ulwelo, kuphela umoya ngeVenturi Nozzle.

Njengokudubula okumanzi, kukwakho namazwi ahlukeneyo okudubula okomileyo. Kweli nqaku, siza kwazisa iiPros and Cons of Dry Blasting.

IiPros zeDry Blasting

1.    Ukusebenza kakuhle

Ukuqhushumba okomileyo kubhekisa ngqo kumacandelo ngokudubula kompu,umjelo weendaba oqhumayo unokuqhutywa ngesantya esiphezulu kakhulu kwisixhobo sokusebenza ngaphandle kwezithintelo, okukhokelela kumazinga okucoca okukhawulezayo kunye/okanye ulungiselelo olungcono lomphezulu kwii-substrates ezininzi.

2.    Ukucoca umphezulu owomeleleyo

Ukuqhushumba okomileyo Icoca ngempembelelo yemithombo yeendaba, igqabhuka kakhulu evumela ukuba ikwazi ukususa ipeyinti enenkani, umhlwa onzima,isikali sokusila, umhlwa, kunye nezinye izingcolisi ezivela kumphezulu wesinyithi. Ubutyobo obunesiphumo bunokuba lula kakhulu ukubususa njengenkunkuma.

3.    Ayisayi kubangela naziphi na iintsimbi ukuba ziruse

Njengoko kungekho manzi abandakanyekayo ekuqhumeni okomileyo, ifaneleke ngokufanelekileyo kwizinto ezingakwaziyo ukumanzi.

4.    Uluhlu olubanzi lwezinto eziqhumayo

Ukudubula okomileyo kunokuphatha kakhulu naluphi na uhlobo lweendaba eziqhumayo ngaphandle komngcipheko wokugqwala okanye ukubola.

5.    Cost-effective

Njengoko ingabandakanyi izixhobo ezongezelelweyo okanye ukugcinwa kunye nokulahlwa kwamanzi kunye nenkunkuma emanzi, ukuqhuma okomileyo kuneendleko eziphantsi kakhulu.kunokuqhushumba okumanzi.

6.    Ukuguquguquka

Ukudubula okomileyo kufuna izixhobo ezincinci kunye nokulungiswa kwaye kunokuqhutywa kwiindawo ezininzi.Ilungele uluhlu olubanzi lwezicelo ezivela kwimveliso ephezulu, ukulungiswa kwendawo, kunye nokugcinwa kwezixhobo kunye nezixhobo ngezikhathi ezithile.

Ii-Cons of Dry Blasting

1.    Ukukhulula uthuli

Uthuli olucolekileyo, olurhabaxa lukhutshwa kokomileyouqhushumbo oluqhumayokunokubangela ukwenzakala kumaqela asebenzayo okanye akufutshane ukuba uthe waphefumlelwa, okanye kumzi-mveliso wengingqi ongevani nothuli. Ngoko keabaqokeleli bothuli okanye izilumkiso ezongezelelweyo zokusingqongileyo ziyafuneka.

2.    Umngcipheko womlilo / wokudubula

I-Static build-up ngexesha lenkqubo eyomileyo yokuqhushumba inokwenza 'iintlantsi ezishushu' ezinokubangela ugqabhuko-dubulo okanye umlilo kwiindawo ezinokutsha. Oku kufuneka kulawulwe ngokusetyenziswa kokuvalwa kwezixhobo, izixhobo zokujonga igesi, kunye namaphepha-mvume.

3.    Ukusetyenziswa kwemidiya engaphezulu

Uqhushumbo olomileyo alubandakanyi amanzi, nto leyo ethetha ukuba ifuna ukugqabhuka ngakumbi. Ukusetyenziswa kwemidiya yokuqhuma okomileyo kujikeleze i-50% ngaphezu kokuqhuma okumanzi.

4.    Ukugqiba okungalunganga

Njengemifanekiso eboniswe ngaphambili,iukugqiba ukuqhuma okomileyo kuveliswa ngamandla anamandla empembelelo yeendaba, eya kushiya i-deformation kumphezulu we-workpiece kwaye ibenze ibe rhabaxa. Ngoko ayifanelekanga xa ufuna i-fine and uniform finish.

Iingcamango Zokugqibela

Ukuba uyafuna ukuukufumana iziphumo ezigqibeleleyokwaye kufuneka ukhusele ngokubonakalayo indawo evulekileyo okanye isityalo esikufuphi nothuli, emva koko ukuqhushumba okumanzi lukhetho olulungileyo kuwe. Nangona kunjalo, kuninzi lwezinye izicelo apho ulawulo olwaneleyo lokusingqongileyo, isiqulatho, kunye nezixhobo zingaphezulu kokulungele ukuqhushumba okomileyo.