Type A sandblast gun is designed for fast efficient sand blasting, and liquid or air cleaning of parts and surfaces. It is a powerful tool for removing tar, rust, old paint, and many other substances, applicable to box manual sandblasting machines and box type automatic sandblasting machines.

Features:

· The gun body is made of die-casting aluminum alloy or PU material, high wear-resistance in lightweight

· Two types of abrasive inlets methods: thread type and straight-in type; for straight-in type, the abrasive inlet diameter is 22mm; for thread type, the abrasive inlet opening is 13mm; air jet openings are all 13mm

· A knurled nut at the gun outlet allows the operator to change nozzles without tools

· Adjustable bracket allows gun fixture in all possible blast directions

· Gun components such as air jet, nozzle insert, nozzle sleeve, and flange nut can be replaced separately to save costs

· Generally used with boron carbide blasting nozzle in the outer diameter of 20mm and length of 35mm

· Thicken aluminum alloy gun body and big air jet make the circulation space limited, which is more suitable for fine grain size blasting media

· Can be worked in both dry and wet blasting

· Suitable for glass, aluminum, and other also be used to clean structural parts, mechanical parts and products, and other items.

Operation:

1. The operator inserts the nozzle washer into a thread nozzle holder and screws in the nozzle, turning it by hand until it seats firmly against the washer.

2. With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting.

3. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.

4.The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

1. Ngaba uyinkampani yokurhweba okanye umenzi?

Siyifektri, ikakhulu imveliso ye-tungsten carbide, i-boron carbide, kunye neemveliso ze-silicon carbide. Kwaye sikwasenza urhwebo ngezinto ezinxulumeneyo ngokweemfuno zabathengi.

2. Sinokuwuqinisekisa njani umgangatho?

Ngalo lonke ixesha isampuli yangaphambi kokuveliswa phambi kwemveliso yobuninzi; Ngalo lonke ixesha uhlolo lokugqibela ngaphambi kokuthunyelwa

3. Kutheni kufuneka uthenge kuthi, hayi kwabanye ababoneleli?

Amava atyebileyo kwimveliso kunye nomgangatho wokuthumela i-ISO, ixabiso elihle kunye nokuhanjiswa okukhawulezayo kwemveliso ebanzi yokuzikhethela; yonga iindleko, yonga amandla, yonga ixesha; zuza iimveliso ezikumgangatho ophezulu, zuza amathuba amaninzi oshishino, uphumelele imakethi!

4. Lingakanani ixesha lokuhambisa kwakho?

Ngokuqhelekileyo, yi-3 ~ 5 iintsuku ukuba iimpahla zikhoyo; okanye yi-15-25 iintsuku ukuba iimpahla azikho kwisitokhwe, kuxhomekeke kubungakanani bomyalelo.

5. Ngaba uyazibonelela ngeesampulu? Isimahla okanye yongeziweyo?

Ngokubanzi, asiboneleli ngeisampulu zasimahla. Kodwa sinokutsala iindleko zesampulu kwii-odolo zakho ezininzi.

6. Ithini imiqathango yakho yentlawulo kunye nendlela?

Intlawulo Ngaphantsi okanye ilingana ne-1000USD, i-100% kwangaphambili. Intlawulo enkulu okanye ilingana ne-1000USD, i-30% T / T kwangaphambili, ibhalansi ngaphambi kokuthunyelwa. Samkela T / T, L / C, Alipay, PayPal, Western Union WeChat, njalo njalo.